Match balls are constructed specifically for competition and the sport's high-level training. These balls feature higher quality materials and must conform to regulation standards of your league. Training and recreational soccer balls are designed to handle extended use on a variety of playing surfaces, often featuring a PVA casing for enhanced durability.
What sets each soccer ball apart from another is the quality of the materials that are used in its construction. The lining, bladder, cover, and the quality of the overall craftsmanship will all influence the final cost of the soccer ball you’re looking at. Higher quality balls are usually bonded together to provide a superior shape retention experience and offer a truer flight.
However, this has not stopped players from preferring butyl as their bladder material of choice. In fact, this preference is so well cemented by players of all skill sets, that manufacturers professional game balls are just as likely to use butyl bladders as they are latex often times even more likely. It is interesting to note that butyl is more durable than latex but less durable than rubber-despite providing had better air retention.

In early FIFA World Cups, match balls were mostly provided by the hosts from local suppliers. Records indicate a variety of models being used within individual tournaments and even, on some occasions, individual games. Over time, FIFA took more control over the choice of ball used. Since 1970 Adidas have supplied official match balls for every tournament.[19]
While the ball features high-quality materials, the focus with this ball is all the smart features and less about the physical make-up of the ball, which doesn’t come in handy when you’re researching! What I did find with this ball is that it’s match quality and built to last. It’s also available in sizes 4 or 5 for multiple ages and training levels.
A factor that makes this official match soccer ball popular is its high-quality features paired up with its affordable price. Its thermal bonded construction is FIFA’s highest quality standard in construction for match balls. Its exterior uses the PU material and is 100% water-proof. The graphics also facilitate high visual response. The butyl bladder facilitates high air retention while the VPM (Valve Position Marker) technology will show you the precise foot placement.
This is the best ball ever made for dogs, especially large dogs who can usually rip a ball apart in a matter of minutes, like mine. This is our second one, the first one we had for over 2 years and my pit bull put so many teeth marks in this ball and it never went flat. The pump end eventually fell out and it still stayed round and would bounce. We only had to buy another one because my crazy dog liked to throw it up in the air and it went over the back fence and another dog (or kid) decided to take it home. I also like that I buy one for my dog, and a kid somewhere gets one too. I will never own another brand of ball for my dogs.
Why do I always have to pump up even expensive balls? Many balls use bladders made out of latex. Natural Latex Rubber bladders offer the softest feel and response, but do not provide the best air retention. Micro pores slowly let air escape. Balls with natural rubber bladders need to be re-inflated more often than balls with butyl bladders. Even after one or two days, the latex bladder will leak enough air so that you will have to inflate the ball back to recommended pressure. Some balls use carbon-latex bladders in which the carbon powder helps to close the micro pores. Soccer balls with carbon latex bladders usually increase air retention to approximately one week. Of course, check the ball for punctures that may cause the air to leak out.
This is a decision that your coach or manager get to decide for you if you are part of a team. Your own ball is one thing that you have control on. However, when it comes to what the team should play with, it is the manager’s job to pick which ball is the best, and what is appropriate for the team for training. Coaches usually stick to training match balls as they give the illusion of actual match balls.
Much like PU or TPU for soccer ball casings, rubber is considered the best of both worlds for soccer ball bladders when it comes to striking a balance between responsiveness and air retention. Oddly enough, this balance does not actually inspire a greater adoption by either manufacturers or players, and as such, soccer balls with rubber bladders are less popular.
This type of ball is easy to distinguish because its outer material is similar to the material used on tennis balls. They normally are a size 5 and similar to the outdoor soccer ball. Indoor soccer balls are purposely designed with less rebound in order to accommodate turf and harder surfaces that cover the walls of an indoor soccer field and playing ground.
Considering the positives previously mentioned, you might be wondering why we think this ball is only suited for practice-even if it is one of the best training soccer balls we have seen. This is because the Nike is not that responsive-at least, not compared to match soccer balls. This is largely because this ball uses a rubber bladder. This bladder is not responsive at all. On top of that, the foam lining and TPU casing are not the most responsive either-even if the latter does have texture to help increase its responsiveness.
Due to it being significantly softer than the other types of rubbers used for soccer ball bladders, latex is generally seen as the premier material. Though, this same perception may not hold as true for practice balls or even game balls at lower levels of competition. This is because latex bladders retain air worse than all of the other soccer ball bladder materials and will need to be re-inflated more often.

The second edition of the new dual bonded production method is the Target DB. This new ball is both machine-stiched and sealed with glue. The contstruction consists of a PU-material laminated with 3.5 mm foam. Two layers of textile underlining are them laminated to the foam layers to add stability. Finally, the panels are 3D printed with a 3mm edge glue and stitched together. The glue is activated in the heat mold to hide the stitches and the seam sealing is done by hand. By using glue in the sealing of the seams, the water uptake is reduced significantly.The bladder inside is a SR-bladder with excellent air retention. The result is a soccer ball with both stability, control and a softer touch compared to other balls in the range.
Size 5 is the official size for professional matches. Therefore, this ball is only available in this size. Do not use this soccer ball on concreted areas. Its unique rubber uses Puma Airlock Valve Technology (PAL) in order to facilitate proper airlock technology. This ball features Perimeter Balance Technology (PBT) which enables it to maintain impressive flight characteristics. https://www.youtube.com/watch?v=j2Xn84L3Kcs
×