The first edition of our newly developed dual bonded production method is used in the new soccer ball called BLAZE DB. The construction of this ball consists of a PU-material laminated with 3 mm foam. Next, two layers of textile underlining are laminated to the foam layer to add stability. The panels are then 3D printed with 3mm edge glue and stitched by hand, In the heat mold the glue is activated to hide the stitches. Next, the seam sealing is done by hand. The glue in the seams reduces the water uptake significantly. The bladder inside is a SR-bladder with excellent air retention. The result is a soccer ball with both stability, control and a softer touch compared to other balls in the range.
This ball is designed to record strike points, speed, spin, and trajectory when used with the training tool. This makes it so much easier to track your progress and find your weak spots during training! The app keeps track of your stats for you to review and compare as you train. Users relate this as a favorite feature because it gives them the opportunity to track their training progress more efficiently.
My friend and I were kicking a soccer ball around the front yard. It was maybe 2007 and I was getting ready to leave for a couple weeks on a trial. Trying to be cute, I tried a handling skill where I flipped the ball up behind my back and then kick it with my heel so it comes back over my head again. So I kicked the ball too hard, it goes out into the street, and a truck promptly runs it over.
The second edition of the new dual bonded production method is the Target DB. This new ball is both machine-stiched and sealed with glue. The contstruction consists of a PU-material laminated with 3.5 mm foam. Two layers of textile underlining are them laminated to the foam layers to add stability. Finally, the panels are 3D printed with a 3mm edge glue and stitched together. The glue is activated in the heat mold to hide the stitches and the seam sealing is done by hand. By using glue in the sealing of the seams, the water uptake is reduced significantly.The bladder inside is a SR-bladder with excellent air retention. The result is a soccer ball with both stability, control and a softer touch compared to other balls in the range.
Still, despite how impressive the materials used for the soccer ball are, Adidas is not done providing one of the best products available. For instance, this ball uses thermal bonding instead of either hand or machine stitching. This has the advantage of allowing the ball to fly truer as well as resisting water better. On top of that, some sellers even have balls with embedded NFC chips, which provide all kinds of valuable feedback information on you play.

However, by selling out so hard in terms of responsiveness, the Mikasa has painted itself into a bit of a corner. Specifically, the synthetic leather casing makes this ball unsuitable for use on any surface outside of natural grass.In fact, even artificial grass will begin to wear down this ball once the glossy finish has been worn away. When you factor in the machine stitching, you end up with one of the least durable soccer balls on our list.
Only size 5, and size 4 are available for this. Although this should not be a major problem as this is for recreational play and practicing purpose, so kids are ok to play with this as well. In fact, the ball that will be given away to the developing countries will be used by the kids mostly. If you are buying this for an adult go for size 5, and if you are buying for kids or youth players then better go for size 4.
Training balls are ideal for training and recreational use. These are the least expensive and more durable compared to professional match balls as they are meant to be continuously used for an extended period of time. This type of ball is usually constructed with 4 or fewer layers. The casing is made of PVC which makes its quality lower compared to a professional match soccer ball. Usually, the panels of a practice ball are molded together and not stitched together. These type of balls can withstand rough surfaces such as; asphalt and concrete.
Besides just its sleek exterior, the Adidas Starlancer is crafted with longevity in mind by the nylon being wound internally and assembled through machine stitching to provide it with an extra level of strength. The exterior is made of TPU material, which is ideal for resisting cuts and scrapes. The bladder which holds the air is Butyl, which works wonders in keeping the shape of the ball perfect at all times.
The internal nylon wound carcass makes certain the ball is a perfect sphere at all times so that its shape can glide smoothly on any surface. The machine stitching is extensive and delivers unrivaled quality in its structure. The butyl bladder guarantees that no air will escape no matter how often the ball is used. TPU material on the outside is advantageous because it resists scuffing and exterior damage.

The soccer ball has gone through various changes just as the football game. As opposed to yesterday’s football ball that had stitches and seams and the classic black and white design, today’s soccer balls are designed with the latest technology that lets the ball bend more, fly quicker and also dip harder. Besides, they are quite soft that they let players kick the ball further without risking injuries. https://www.youtube.com/watch?v=DGp37du0xbQ
×