Inflate soccer balls to the pressure of 6-8 PPI (pounds per square inch). A pressure gauge will tell you when the air is enough. Under or over-inflating a soccer ball will shorten its life in one way or another. When under-inflated, the ball will not be resistant to the impact of kicks. On the other hand, over inflation will stretch out the bladder and put pressure on the panel stitches.
The inner lining and the bladder are some of the key components of a soccer ball’s construction. These components are the factors that give control to the shape and the feel of a soccer ball. The usual match soccer ball has four layers of a blended polyester and cotton material in its lining, while mid-range ones have two cotton and polyester layers.
The bladder, or the inside, of the soccer ball, is also very important to talk about. There are typically only two choices that they are made out of butyl and latex. The higher-end balls usually are latex while butyl is typically meant for training balls. However, butyl is much better at keeping the air and shape of the ball for longer periods!
Early footballs began as animal bladders or stomachs that would easily fall apart if kicked too much. Improvements became possible in the 19th century with the introduction of rubber and discoveries of vulcanization by Charles Goodyear. The modern 32-panel ball design was developed in 1962 by Eigil Nielsen, and technological research continues today to develop footballs with improved performance. The 32-panel ball design was soon overcome by 24-panel balls as well as 42-panel balls, both of which improved performance compared to before, in 2007.
Another type of soccer ball that some players may find to be useful is the indoor soccer ball. Indoor balls are designed to have less bounce and rebound to them, making it possible to control the ball on a tighter court or field. The cover of an indoor ball is also the strongest of any category, so it can withstand play on turn, hard court surfaces, and impacts with walls.
Select's attention to detail can be found in the ball's handy work and composition. It comes in nine different colors, including bright orange and bright yellow, which are perfect for training in semi-darkness. The 1.5mm PU cover is hand-stitched and textured for the brighter colors, adding durability. The design also aides turf play by zeroing in on control and resistance.
Kelsey is a wife and work from home mommy of two beautiful children. A former medical assistant, Kelsey now focuses on writing and reviewing products to help other work from home mom and dads lives a little easier. She has passion for technology and learning, If you ask Kelsey, the words "A type" and "organized" wouldn’t even begin to describe her.
The outer casing of a soccer ball is composed of panels made from synthetic materials, such as PVC, PU, or a combination, sewn or glued together. Soccer ball casings are rarely leather anymore, since leather tends to absorb moisture making the ball heavier and not perform as well. The number of panels or sections of the outer casing varies according to design. Most professional soccer balls are the 32-panel design. More panels mean a rounder and stabler ball, and a more accurate flight.
Size 5 is the official size for professional matches. Therefore, this ball is only available in this size. Do not use this soccer ball on concreted areas. Its unique rubber uses Puma Airlock Valve Technology (PAL) in order to facilitate proper airlock technology. This ball features Perimeter Balance Technology (PBT) which enables it to maintain impressive flight characteristics. https://www.youtube.com/watch?v=j2Xn84L3Kcs