The interior of the 1GK USA is a bit more mixed in terms of quality than the exterior is. However, the materials used are explicitly designed to increase the ball’s responsiveness-likely to make up for its uncommon rolling and flight patterns due to the butyl fins. Still, aside from being the only hand-sewn ball, this is also the only ball made with a latex bladder on our list. The potential downside is the cotton lining which will get heavy when wet-though it is much softer and provides better responsiveness than either polyester or nylon.
This ball also comes in sizes 5, 4, and 3 and ships at one pound exactly, and it does not appear to come inflated. This soccer ball ships within the US and is not eligible for international shipping. For the low price and quality of this ball, it is totally worth the value because the exact ball that the pros use is around $100, and this pro soccer ball replica is a fraction of the price.
As I mentioned above there are thousands of ball that you can choose from, but they are not all good and also we are here focused on best soccer balls under $100. If I would like to make a full review, I would have to buy a lot of balls and test all of them, but this unfortunately is not possible, because I don’t have so much money. Here comes out my experience during my career and other recommendations.

The bladder, or the inside, of the soccer ball, is also very important to talk about.  There are typically only two choices that they are made out of butyl and latex.  The higher-end balls usually are latex while butyl is typically meant for training balls.  However, butyl is much better at keeping the air and shape of the ball for longer periods!   

Latex bladders are used in high-quality balls. These kind of bladders are soft and provide good feeling. They offer better response and bounce than Butyl bladders, but the downside of this kind of bladder is they don’t hold the air for too long. As a result, they require filling more frequently. Air escapes due to micropores on the cover, but nowadays some balls are constructed with carbon latex bladder to help to close these micropores. As a result, the balls can hold air for a longer period.


6. Mexico had the top selling jersey at the 2018 FIFA World Cup so it should come as no surprise that the adidas Mexico Soccer Ball has been a top seller in 2018 as well. El Tri is an adidas sponsored team so their ball had the team name and similar pixilated design as the Telstar 18 ball. And it was at a great price of $19.99 making it affordable for all players and great to take to the match for a kick-about before watching the national team play.
Despite having so many good reviews from the users, why aren’t we keeping Wilson traditional ball on our list? It is because we strongly think Wilson is specialized in making tennis equipment. On the other hand, this model did not meet our expectation. This model seems too heavy to us, and overall feel was not too good. That is why we are not recommending you to go for this option. But obviously, the final decision is yours. So many people are still buying this 🙂
When it comes to soccer ball bladders, you will generally opt for the material that provides the most responsive touch for the highest levels of play. This is because it is a simple matter to re-inflate a soccer ball not to mention the fact that most competitive leagues will have numerous balls on hand. If touch and responsiveness are your key bladder attribute, there is no other material better than latex.
This can be used as a great option for goalkeeper training as well. Why? Look, you can hardly see the lines on this ball, hence you won’t be able to guess the direction by only seeing the spin of the ball. That means as a goalkeeper you will have to give full concentration to detect the direction of the sliding balls. This is obviously helpful if you are a goalkeeper, and looking for a sliding challenge.
It depends on its intended use. Soccer ball casings are made from three kinds of synthetic materials. Polyvinyl carbonate (PVC) which is what most less expensive training balls are made from, Polyurethane (PU) which is the preferred ball for soccer tournaments, and a combination of the two. There are also foam and rubber training soccer balls for kids. Some kids' soccer balls are made of 100 percent thermoplastic polyurethane (TPU), which is a kind of foamy casing material so the ball is very soft. There are greater and lesser grades of each kind of material. PU-covered balls are generally softer, livelier, and have a better feel to them, and are what most people seek when looking for a optimal performing soccer ball.

The most commonly used materials for casing are PolyUrethane(PU) and PolyVinyl Carbonate (PVC), synthetic leather or a combination of PU and PVC. You can distinguish the type of casing used by touch. Balls that uses PVC usually have a hard exterior but are cheap and durable. PU cased balls are softer to the touch, high in quality and more responsive than PVC balls. Synthetic leather balls offer increased control hence ideal for professional matches or high-level playing. You will also notice a glossy finish on all soccer balls. This comes in handy in minimizing scuffing and water damage to the balls.
Another type of soccer ball that some players may find to be useful is the indoor soccer ball. Indoor balls are designed to have less bounce and rebound to them, making it possible to control the ball on a tighter court or field. The cover of an indoor ball is also the strongest of any category, so it can withstand play on turn, hard court surfaces, and impacts with walls.
The first edition of our newly developed dual bonded production method is used in the new soccer ball called BLAZE DB. The construction of this ball consists of a PU-material laminated with 3 mm foam. Next, two layers of textile underlining are laminated to the foam layer to add stability. The panels are then 3D printed with 3mm edge glue and stitched by hand, In the heat mold the glue is activated to hide the stitches. Next, the seam sealing is done by hand. The glue in the seams reduces the water uptake significantly. The bladder inside is a SR-bladder with excellent air retention. The result is a soccer ball with both stability, control and a softer touch compared to other balls in the range.
In the end, the winner was fairly clear to us. Amongst all of these soccer balls, it appears that the best in this case, was the last one that we looked at Adidas MLS Top Glider Soccer Ball. When comparing all of the products side by side it just appears that in terms of design, gameplay, and durability that this one stood out amongst the rest. It has a ton of great reviews and positive customer feedback, so it appears that the vast majority of soccer players and customers were really happy with this ball.

Over time, many soccer balls tend to go out-of-round, especially if they are well-used. The Glider is designed to maintain its shape without losing air thanks to the firmness and consistency of the butyl bladder. Under regular use, we found that the air pressure was consistent enough that we didn’t need to add more air to the ball. If you play in organized soccer, then having consistency from the practice ball to the game ball is very important for skill development. The machine-stitched panels offer that experience for most players, even though the ball has the standard panel design.
The outer casing of a soccer ball is composed of panels made from synthetic materials, such as PVC, PU, or a combination, sewn or glued together. Soccer ball casings are rarely leather anymore, since leather tends to absorb moisture making the ball heavier and not perform as well. The number of panels or sections of the outer casing varies according to design. Most professional soccer balls are the 32-panel design. More panels mean a rounder and stabler ball, and a more accurate flight.

The highest in cost, top match balls for elite soccer players are constructed with a supreme quality cover, backing, and bladder for the most predictable flight pattern and striking ability. Some of the most impressive official match balls on the field are made with the threadless, seamless, beveled edge (TSBE) technology which provides a seamless surface for touch and less water uptake to stay in control. adidas soccer balls that pass a demanding series of tests, set by FIFA, on the shape, weight, performance, rebound and water absorption have the highest ranking a soccer ball can get. Most adidas training and pro match balls are FIFA approved so you can lead the charge down the pitch.

Well, panels are not any different component. Panels are the segments or octagon quilt that are seen outside the balls. Of course, nowadays you will find some other shapes besides octagon. FIFA official balls usually contain 32 panels. But nowadays you will also find 26, 18, 14, 8 or even 6 panels with different shapes and designs from those of conventional balls.
Adidas says its design was motivated by Russia's urban landscapes. It uses textured graphics and a metallic sheen to bring a modern look to the classic design. The ball is made of six panels of thermally bonded TPU and about 15% silicone. The materials allow for better trajectory, accuracy, responsiveness, and low water absorption. It also feels well-padded and slightly lighter than previous match balls.
×