Select's attention to detail can be found in the ball's handy work and composition. It comes in nine different colors, including bright orange and bright yellow, which are perfect for training in semi-darkness. The 1.5mm PU cover is hand-stitched and textured for the brighter colors, adding durability. The design also aides turf play by zeroing in on control and resistance.
I purchased light-up-soccer ball for my grandson for his father's birthday (Brooks Bowers) who has officiated games, played games and loved soccer for many years. And I have a picture of my grandson (Kieran) smiling at the rolling lighted ball after he kicked it. I thought it a well made, worked as it arrived with batteries already installed and a wonderful gift. To my surprise my grandson at age 3 is already attending soccer camps for young children.
We covered the quality in small detail above, but we’ll look into a little further here.  The quality of the ball you pick is very important.  If you want exactly what the pros play with, then you will have to pay a little more as a result of picking the premium choice. Those balls fly better and more true than their counterparts, but they are not meant to be practiced with on a regular basis.  Premium balls tend to have a softer impact on both your cleats and ankle guards to allow for more ball control and handling.  After the “premium” match ball category is the “match ball” category.  These aren’t nearly as expensive as the premiums are, but are still very good in match situations.  These aren’t meant for practice, but they typically can hold up for extended periods of time, possibly a season or two.  The third type is “training balls.”  These balls are meant for training and practice, and they can be used continuously without doing damage to it.  I have some great training balls that have lasted upwards of six years!  The quality of training balls has gone up drastically over the years that I have been playing.  When I was younger, some of them were so hard that you’d feel like your foot was broken after kicking them.  Nowadays, they literally feel like a premium ball with their softness and their flight.  So, almost any ball is great nowadays from the right supplier!
Inflate soccer balls to the pressure of 6-8 PPI (pounds per square inch). A pressure gauge will tell you when the air is enough. Under or over-inflating a soccer ball will shorten its life in one way or another. When under-inflated, the ball will not be resistant to the impact of kicks. On the other hand, over inflation will stretch out the bladder and put pressure on the panel stitches.
Some additional information worth noting with this Adidas smart soccer ball is that you cannot use the sensor features for kicks once the ball is in motion. Users report you cannot use it for tracking stats associated with, for example, a drop kick. The ball must be sitting still on the ground before being kicked if you wish to track the statistics.
The cheaper balls only have two polyester layers on their lining. Soccer ball bladders can be made from two different kinds of materials. They can either be latex or butyl. A soccer ball bladder is a component of a soccer ball and it is tasked in containing the air that is within the ball. It also contributes to its shape and the ball’s receptiveness on the field.
Whether it was a size 3, 4, or 5, we found that the Adidas Starlancer performed as it should. This allows beginning players at any age to begin getting a feel for what it is like to have the ball at their feet. There are two color options that come with the Starlancer as well and each performs as it should. For normal passing, crossing, and shooting drills, we found this soccer ball to be true to form. The machine stitching is strong and offers a fairly long lasting performance.

Whether you're looking for soccer cleats, jerseys, balls & more, Third Coast Soccer has it all and more at extremely low prices in our soccer clearance shop. We carry a wide selection of uniforms and gear for men, women, and children ideal for every situation in this massive soccer sale. Buy clearance soccer cleats and soccer jerseys made by all the biggest brands you know and and at all the lowest prices possible. Shop Third Coast Soccer's soccer clearance today for the perfect cleats, jerseys, balls & more that you need to improve your game!
Customers really enjoyed the speed of this ball on the ground, although this exterior TPU was a little slick when making contact for a kick. Users really enjoyed the low price of this soccer ball replica vs. the exact ball that the pros use in European match play. You just need to make sure that you have your own ball bump because the ball does not come inflated.
Soccer balls come in different variants and choosing one that is right will depend on how you prefer your ball and how you would like to use it. Soccer balls are built of different materials mostly made out of common rubber, polyurethane, nylon or polyvinyl chloride. While polyvinyl chloride balls can get really durable, they may not be as soft and touch responsive as polyurethane blend balls.

Here I have listed some of the best soccer balls which are really high quality and by ordering such balls you will for sure have the best experience and also better skill improvements on the pitch. These balls have also great customer testimonials, which I think is nothing new, because they are of course some of the best soccer balls in the world! Take a look!

However, by selling out so hard in terms of responsiveness, the Mikasa has painted itself into a bit of a corner. Specifically, the synthetic leather casing makes this ball unsuitable for use on any surface outside of natural grass.In fact, even artificial grass will begin to wear down this ball once the glossy finish has been worn away. When you factor in the machine stitching, you end up with one of the least durable soccer balls on our list.


Ok. I was skeptical about this ball...surprisingly it is bright. It seems smaller than a normal soccer ball so I measured it. Yep, 27” as stated. I wonder how long the batteries will last. I’ll update this review after the 1st pair die. feels durable. Lights upon kicking. Takes two sets of batteries to light entire ball so make sure you keep lots of replacements on hand otherwise you’ll end up with 1/2 the ball lit.
The internal nylon wound carcass makes certain the ball is a perfect sphere at all times so that its shape can glide smoothly on any surface. The machine stitching is extensive and delivers unrivaled quality in its structure. The butyl bladder guarantees that no air will escape no matter how often the ball is used. TPU material on the outside is advantageous because it resists scuffing and exterior damage.
Soccer ball covers are meant to protect the construction of a ball, and make it more durable and long lasting. Manufacturers use two types of materials, mainly polyurethane (PU) or polyvinyl carbonate (PVC). PVC is the cheaper and much affordable variant, but it is more durable than PU. It has scuff-resistance, which makes it perfect for training soccer balls. PU is used for match balls, since it is softer than a PVC soccer ball and tends to respond better to contact.
If you’re working on headers, then your forehead won’t feel like it is being repetitively hit with a meat tenderizer thanks to the design of this ball. That soft touch also translates to a reasonably authentic movement when working on crosses or shots. There is a reasonable bend that allows players to wrap a leading ball around a defensive line, curve a shot around a wall, or work on accurate passing. Control skills off of the chest or knee feel close to authentic as well.
How Do I inflate my soccer balls? Soccer balls lose air pressure over time. Sometimes over a few days (soccer balls that use butyl bladders keep air pressure longer than balls that use latex bladders). Be sure to check the pressure frequently to make sure the ball is properly inflated.  Therefore, invest in a good ball pump, have a supply of inflation needles and use a low pressure gauge to measure for proper inflation. 
Soccer ball covers are meant to protect the construction of a ball, and make it more durable and long lasting. Manufacturers use two types of materials, mainly polyurethane (PU) or polyvinyl carbonate (PVC). PVC is the cheaper and much affordable variant, but it is more durable than PU. It has scuff-resistance, which makes it perfect for training soccer balls. PU is used for match balls, since it is softer than a PVC soccer ball and tends to respond better to contact.

Whereas plenty of manufacturers that we reviewed opted to go with a soccer ball that was more durable than responsive, Mikasa takes the opposite approach and focuses primarily on the touch that their ball can provide. This is most apparent in the soccer ball’s choice of casing material. The synthetic leather casing of the Mikasa is by far the softest and naturally responsive-without the inclusion of texture-out of any other soccer ball we reviewed. https://www.youtube.com/watch?v=3OKagE2ZIRA
×